From: stan (stanb@panix.com)
Date: Sun Feb 26 2006 - 14:20:05 EST
I'm exploring the brave new world of (to me) SCSI card support under
Soalris X86. I've got a couple of questions.
One of the cards that I need to use (to support the old tape drive I'm
replacing) is an Adaptec 29160 (LVD). I found the following via a Goggle
search.
Is there any possibility that drivers for earlier versions of Soalris X86
will work with V10 X86 64bit?
If so, how would I install them. The instructions for installing this
discuss the use of a floppy drive, which my machine does not have. Could I
plug in a USB floppy, and get it to work?
The also discuss "device manager floppy", which I also don't have. Where
could I get this?
Thanks for helping out a newbie here.
-- U.S. Encouraged by Vietnam Vote - Officials Cite 83% Turnout Despite Vietcong Terror - New York Times 9/3/1967 _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:39:07 EDT