How to enable PCI0 in OK status?

From: scalonge (scalonge@163.com)
Date: Wed Feb 15 2006 - 05:28:28 EST

Next message: Colin Symington: "Cannot format disk while it has mounted partitions on E280R"
Previous message: Nadig Gurudatta-A6063C: "Console problem sun fire v440"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi, all
Sun fire v240, and Fibre Card is pluged in the slot pci0
I rebooted the server to OK level, then did the following operations:
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
{1} ok printenv
Variable Name Value Default Value

asr-policy normal normal
test-args
diag-passes 1 1
local-mac-address? true true
fcode-debug? false false
scsi-initiator-id 7 7
oem-logo No default
oem-logo? false false
oem-banner No default
oem-banner? false false
ansi-terminal? true true
screen-#columns 80 80
screen-#rows 34 34
ttyb-rts-dtr-off false false
ttyb-ignore-cd true true
ttya-rts-dtr-off false false
ttya-ignore-cd true true
ttyb-mode 9600,8,n,1,- 9600,8,n,1,-
ttya-mode 9600,8,n,1,- 9600,8,n,1,-
output-device ttya ttya
[7m More [<space>,<cr>,q,n,p,c] ? [m

input-device ttya ttya
auto-boot-on-error? true false
error-reset-recovery sync sync
load-base 16384 16384
auto-boot? true true
network-boot-arguments
boot-command boot boot
diag-file
diag-device disk0:a net
boot-file
boot-device /pci@1c,600000/scsi@2/di ... disk net
use-nvramrc? false false
nvramrc ." ChassisSerialNumber F ... 
security-mode none No default
security-password No default
security-#badlogins 0 No default
verbosity normal normal
diag-trigger none error-reset power-on-res ...
service-mode? false false
diag-script normal normal
diag-level off max
diag-switch? false false
{1} ok setenv auto-boot? false
auto-boot? = false
{1} ok reset-all
Probing system devices
Probing memory
Probing I/O buses
<o:p> </o:p>
Sun Fire V240, No Keyboard
Copyright 2005 Sun Microsystems, Inc. All rights reserved.
OpenBoot <st1:chsdate w:st="on" IsROCDate="False" IsLunarDate="False" Day="30" Month="12" Year="1899">4.17.1</st1:chsdate>, 2048 MB memory installed, Serial #64017415.
Ethernet address 0:3:ba:dd:c4:7, Host ID: 83bac407.
<o:p> </o:p>
<o:p> </o:p>
Initializing 1MB of memory at addr 103feea000 -
 
Initializing 1MB of memory at addr 103fee0000 -
 
Initializing 1MB of memory at addr 103fea0000 -
 
Initializing 15MB of memory at addr <st1:chmetcnv w:st="on" TCSC="0" NumberType="1" Negative="False" HasSpace="False" SourceValue="103" UnitName="F">103f</st1:chmetcnv>002000 -
 
Initializing 16MB of memory at addr 103e002000 -
 
Initializing 992MB of memory at addr 1000000000 /-
 
Initializing 1024MB of memory at addr 0 /-
 

{1} ok test obdiag- 
Searching for selftest methods: network network flashprom rtc i<st1:chmetcnv w:st="on" TCSC="0" NumberType="1" Negative="False" HasSpace="False" SourceValue="2" UnitName="C">2c</st1:chmetcnv> serial serial rmc-comm ide scsi scsi network network SUNW,qlc [1;1H[J _____________________________________________________________________________
| o b d i a g |
|_________________________ _________________________ _________________________|
| | | |
| 1 SUNW,qlc@1 | 2 flashprom@2,0 | 3 i<st1:chmetcnv w:st="on" TCSC="0" NumberType="1" Negative="False" HasSpace="False" SourceValue="2" UnitName="C">2c</st1:chmetcnv>@0,320 |
| 4 ide@d | 5 network@2 | 6 network@2 |
| 7 network@2,1 | 8 network@2,1 | 9 rmc-comm@0,3e8 |
| 10 rtc@0,70 | 11 scsi@2 | 12 scsi@2,1 |
| 13 serial@0,2e8 | 14 serial@0,<st1:chmetcnv w:st="on" TCSC="0" NumberType="1" Negative="False" HasSpace="False" SourceValue="3" UnitName="F">3f</st1:chmetcnv>8 | |
|_________________________|_________________________|_________________________|
| Commands: test test-all except help what setenv set-default exit |
|_____________________________________________________________________________|
| diag-passes=1 diag-level=off test-args= |
|_____________________________________________________________________________|
<o:p> </o:p>
obdiag> test 1
Hit the spacebar to interrupt testing
Testing /pci@1d,700000/SUNW,qlc@1 Starting memory test - press any key to terminate test
HBA memory size - 131072 bytes 
 Testing memory, pattern 1 |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/
 Testing memory, pattern 2 -\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\
 Testing memory, pattern 3 |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/
 Testing memory, pattern 4 -\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\
 Testing memory, pattern 5 |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/
 Testing memory, pattern 6 -\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\
 Testing memory, pattern 7 |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/
 Testing memory, pattern 8 -\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\
 Online Self-test Passed
 1-bit Internal Loopback Test Passed
 10-bit Internal Loopback Test Passed
 External Loopback Test Failed
 Loopback Error
 Frame Length Error Count 57088 
Error: /pci@1d,700000/SUNW,qlc@1 selftest failed, return code = -1
Selftest at /pci@1d,700000/SUNW,qlc@1 ................................. failed
Pass:1 (of 1) Errors:1 (of 1) Tests Failed:1 Elapsed Time: 0:0:1:50
<o:p> </o:p>
<o:p> </o:p>
Hit any key to return to the main menu 
<o:p> </o:p>
[1;1H[J _____________________________________________________________________________
| o b d i a g |
|_________________________ _________________________ _________________________|
| | | |
| 1 SUNW,qlc@1 | 2 flashprom@2,0 | 3 i<st1:chmetcnv w:st="on" TCSC="0" NumberType="1" Negative="False" HasSpace="False" SourceValue="2" UnitName="C">2c</st1:chmetcnv>@0,320 |
| 4 ide@d | 5 network@2 | 6 network@2 |
| 7 network@2,1 | 8 network@2,1 | 9 rmc-comm@0,3e8 |
| 10 rtc@0,70 | 11 scsi@2 | 12 scsi@2,1 |
| 13 serial@0,2e8 | 14 serial@0,<st1:chmetcnv w:st="on" TCSC="0" NumberType="1" Negative="False" HasSpace="False" SourceValue="3" UnitName="F">3f</st1:chmetcnv>8 | |
|_________________________|_________________________|_________________________|
| Commands: test test-all except help what setenv set-default exit |
|_____________________________________________________________________________|
| diag-passes=1 diag-level=off test-args= |
|_____________________________________________________________________________|
<o:p> </o:p>
obdiag> exit
{1} ok <o:p></o:p>
{1} ok reset-all reset-all
Probing system devices
Probing memory
Probing I/O buses
<o:p> </o:p>
Sun Fire V240, No Keyboard
Copyright 2005 Sun Microsystems, Inc. All rights reserved.
OpenBoot <st1:chsdate w:st="on" IsROCDate="False" IsLunarDate="False" Day="30" Month="12" Year="1899">4.17.1</st1:chsdate>, 2048 MB memory installed, Serial #64017415.
Ethernet address 0:3:ba:d0:d4:7, Host ID: 83d0d407.
<o:p> </o:p>
<o:p> </o:p>
<o:p> </o:p>
 ERROR: The following devices are disabled:
 pci0
<o:p> </o:p>
Initializing 1MB of memory at addr 103ff10000 -
 
Initializing 1MB of memory at addr 103feea000 -
 
Initializing 1MB of memory at addr 103fee0000 -
 
Initializing 15MB of memory at addr <st1:chmetcnv w:st="on" TCSC="0" NumberType="1" Negative="False" HasSpace="False" SourceValue="103" UnitName="F">103f</st1:chmetcnv>002000 -
 
Initializing 16MB of memory at addr 103e002000 -
 
Initializing 992MB of memory at addr 1000000000 /-
 
Initializing 1024MB of memory at addr 0 /-
 

{1} ok boo probe-scsi-all
/pci@<st1:chmetcnv w:st="on" TCSC="0" NumberType="1" Negative="False" HasSpace="False" SourceValue="1" UnitName="C">1c</st1:chmetcnv>,600000/scsi@2,1
<o:p> </o:p>
/pci@<st1:chmetcnv w:st="on" TCSC="0" NumberType="1" Negative="False" HasSpace="False" SourceValue="1" UnitName="C">1c</st1:chmetcnv>,600000/scsi@2
Target 0 
 Unit 0 Disk SEAGATE ST373207LSUN<st1:chmetcnv w:st="on" TCSC="0" NumberType="1" Negative="False" HasSpace="False" SourceValue="72" UnitName="g">72G</st1:chmetcnv> <st1:chmetcnv w:st="on" TCSC="0" NumberType="1" Negative="False" HasSpace="False" SourceValue="45" UnitName="a">045A</st1:chmetcnv>
Target 1 
 Unit 0 Disk SEAGATE ST373207LSUN<st1:chmetcnv w:st="on" TCSC="0" NumberType="1" Negative="False" HasSpace="False" SourceValue="72" UnitName="g">72G</st1:chmetcnv> <st1:chmetcnv w:st="on" TCSC="0" NumberType="1" Negative="False" HasSpace="False" SourceValue="45" UnitName="a">045A</st1:chmetcnv>
<o:p> </o:p>
{1} ok boot
Boot device: /pci@<st1:chmetcnv w:st="on" TCSC="0" NumberType="1" Negative="False" HasSpace="False" SourceValue="1" UnitName="C">1c</st1:chmetcnv>,600000/scsi@2/disk@0,0:a File and args: 
|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/
SunOS Release 5.10 Version Generic_118822-23 64-bit
Copyright 1983-2005 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-
Type 'go' to resume
{1} ok boot -r
Probing system devices
Probing memory
Probing I/O buses
<o:p> </o:p>
Sun Fire V240, No Keyboard
Copyright 2005 Sun Microsystems, Inc. All rights reserved.
OpenBoot <st1:chsdate w:st="on" IsROCDate="False" IsLunarDate="False" Day="30" Month="12" Year="1899">4.17.1</st1:chsdate>, 2048 MB memory installed, Serial #64017415.
Ethernet address 0:3:ba:d0:d4:7, Host ID: 83d0d407.
<o:p> </o:p>
<o:p> </o:p>
<o:p> </o:p>
 ERROR: The following devices are disabled:
 pci0
<o:p> </o:p>
Initializing 1MB of memory at addr 103ff10000 -
 
Initializing 1MB of memory at addr 103feea000 -
 
Initializing 1MB of memory at addr 103fee0000 -
 
Initializing 15MB of memory at addr <st1:chmetcnv w:st="on" TCSC="0" NumberType="1" Negative="False" HasSpace="False" SourceValue="103" UnitName="F">103f</st1:chmetcnv>002000 -
 
Initializing 16MB of memory at addr 103e002000 -
 
Initializing 992MB of memory at addr 1000000000 /-
 
Initializing 1024MB of memory at addr 0 /-
 
Rebooting with command: boot -r
Boot device: /pci@<st1:chmetcnv w:st="on" TCSC="0" NumberType="1" Negative="False" HasSpace="False" SourceValue="1" UnitName="C">1c</st1:chmetcnv>,600000/scsi@2/disk@0,0:a File and args: -r
|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/
SunOS Release 5.10 Version Generic_118822-23 64-bit
Copyright 1983-2005 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|
Type 'go' to resume
{1} ok <o:p></o:p>
[Connection to 192.168.255.203 idle too long; timed out]
<o:p> </o:p>
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = 
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
My question:<o:p></o:p>
How to enable PCI0?<o:p></o:p>
<o:p> </o:p>
Thanks a lot!
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers

Next message: Colin Symington: "Cannot format disk while it has mounted partitions on E280R"
Previous message: Nadig Gurudatta-A6063C: "Console problem sun fire v440"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:38:58 EDT