From: NetComrade (netcomrade@bookexchange.net)
Date: Fri Feb 10 2006 - 12:37:46 EST
I only got one reply, but it completely answered my question.
Thank you Michael.
Answer below:
you won't be able to attach the StorEdge L9 to the X4100, because the L9
requires an addin HVD SCSI controller which is *only* available as a PCI
card. The X4100 has only PCI-X slots.
Please review the X4100 page in the Sun System Handbook (this is a direct
link to the SCSI section). The only listed SCSI controller is
*incompatible*
with the L9. Never attach a HVD SCSI device to a LVD/SE SCSI controller,
this can damage both the controller and the device !
http://sunsolve.sun.com/handbook_pub/Systems/SunFireX4100/components.html#SCSI
A side note: The Sun StorEdge L9 is a re-branded HP 1/9 with was available
with an Ultrium 2 drive. The "original" HP 1/9 has a LVD/SE interface with
works perfectly with the listed Sun SCSI controller (and any other LVD/SE
SCSI controller). About 3 years ago we had two of these at our company
attached to a Sun F280R and some PC servers.
----- Original Message -----
To: <sunmanagers@sunmanagers.org>
Sent: Tuesday, January 24, 2006 8:31 PM
Subject: StorEdge L9 and Solaris x86
> I apologize for a repost, but I had a bad MX DNS entry on the domain,
and
> wasn't able to receive any emails. If you could be kind enough to resend
> your replies, I'll greatly appreciate.
> Thanks.
>
> Original message:
>
> Has anyone been able to hook up Storedge L9 tape library to a solaris
x86
> box? (x4100 in our case)
>
> Any links, or other potential info is appreciated.
>
> Any alternative ideas (other comparable tape devices) would be fine too.
>
> Thanks,
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:38:56 EDT