From: Sebastien DAUBIGNE (sebastien.daubigne@atosorigin.com)
Date: Thu Feb 02 2006 - 07:48:16 EST
Thanks to David Spillane from Fujitsu who found the solution :
> Other possibility is that HBAnywhere is running and keeps DR/cfgadm from disconnecting it.
>
> Try to kill rmserver process (it's HBAnywhere front end) to release the fc card
> with cfgadm command.
>
So I stopped HBAnywhere frontend with the init script
*/etc/init.d/ElxRMSrv, then I was able to disconnect the HBA :
**/ # ps -ef |grep -i hba
root 3755 3748 0 Oct 21 ? 0:00 /usr/sbin/hbanyware/rmserver
root 3756 3748 0 Oct 21 ? 0:00 /usr/sbin/hbanyware/rmserver
root 3757 3748 0 Oct 21 ? 0:00 /usr/sbin/hbanyware/rmserver
root 3758 3748 0 Oct 21 ? 0:00 /usr/sbin/hbanyware/rmserver
root 3748 1 0 Oct 21 ? 0:15 /usr/sbin/hbanyware/rmserver
root 23363 22681 0 13:21:54 pts/17 0:00 grep -i hba
/ # sh /etc/init.d/ElxRMSrv stop
/ # ps -ef |grep -i hba
root 23510 22681 0 13:22:03 pts/17 0:00 grep -i hba
/ # cfgadm -c disconnect pcipsy9:R0B00-PCI#slot03
/ # cfgadm -v pcipsy9:R0B00-PCI#slot03
Ap_Id Receptacle Occupant Condition
Information
When Type Busy Phys_Id
pcipsy9:R0B00-PCI#slot03 disconnected unconfigured unknown
pcic5a:1 R0B00-PCI#03
Dec 22 2003 unknown n /devices/pci@c5,2000:R0B00-PCI#slot03*
Sebastien DAUBIGNE a icrit :
> Hi,
>
> +++Fujitsu Primepower 900 + Emulex LP 9802
> +++Solaris 8 02/02 +VxVM3.5 + Emulex driver LPFC 6.02e
>
> One of the HBA failed (the device is multipathed via VxDMP).
> It has been disabled by VxVM, so the HBA is completely released :
>
> / # vxdmpadm listctlr all
> CTLR-NAME ENCLR-TYPE STATE ENCLR-NAME
> =====================================================
> c2 OTHER_DISKS ENABLED OTHER_DISKS
> c12 OTHER_DISKS ENABLED OTHER_DISKS
> c16 IBM_SHARK ENABLED IBM_SHARK0
> c17 IBM_SHARK DISABLED IBM_SHARK0
> c14 IBM_SHARK ENABLED IBM_SHARK0
> c15 IBM_SHARK ENABLED IBM_SHARK0
>
>
> I try to hot-swap the HBA but DR can't neither unconfigure nor
> disconnect it :
>
>
> / # cfgadm -l -v pcipsy9:R0B00-PCI#slot03
> Ap_Id Receptacle Occupant Condition
> Information
> When Type Busy Phys_Id
> pcipsy9:R0B00-PCI#slot03 connected configured ok
> pcic5a:1 R0B00-PCI#03
> Dec 22 2003 fibre/hp n /devices/pci@c5,2000:R0B00-PCI#slot03
>
> / # cfgadm -f -v -c unconfigure pcipsy9:R0B00-PCI#slot03
> cfgadm: Component system is busy, try again: unconfigure failed
>
> / # cfgadm -f -v -c disconnect pcipsy9:R0B00-PCI#slot03
> cfgadm: Component system is busy, try again: disconnect failed
>
>
> It seems the device is busy, but I can't see why.
>
> Any idea ?
>
>
-- Sebastien DAUBIGNE Sebastien.daubigne@atosorigin.com - +33(0)5.57.26.56.36 AtosOrigin Infogerance - IMS/ERP/Pessac _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:38:49 EDT