From: ALLEN, David (David.ALLEN@eur.crowncork.com)
Date: Tue Jan 17 2006 - 04:17:57 EST
Hi,
I have loaded a Sun blade 1500 flash image onto a Ultra 60. Needless to say
the graphics did not work, with the computer complaining the graphic card
driver could not be found.
I subsequently loaded the correct driver (expert 3d) and there are no more
errors about the driver.
However, when X attempts to start on the ultra 60 I now get the message "X
could not be started" and I end up with a terminal login.
Any suggestions, or do I have to rebuild the machine from scratch? I
originally used the flash image as applications/printers etc had already
been set up.
Thanks in advance.
David
CONFIDENTIALITY NOTICE
The information contained in this e-mail is intended only for the
confidential use of the above named recipient. If you are not the intended
recipient or person responsible for delivering it to the intended recipient,
you have received this communication in error and must not distribute or
copy it. Please accept the sender's apologies, notify the sender immediately
by return e-mail and delete this communication. Thank you.
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:38:32 EDT