From: teladmin@comcast.net
Date: Tue Dec 20 2005 - 14:20:46 EST
Hello Sun managers,
I have been search through sunmagers.org archive and have not find the way that I can pass my Netra T1400 LOM.
Here is my problems and hope some one on the list can help out.
I hook up hyper terminal via cisco cable to Alarm port.
I can see lom> prompt, but can boot up the system.
I can run, show, reset, poweroff and poweron and then it show lom> again, but can't pass this.
Here is the infofrom the lom> command:
lom>show
model Netra t140x
hostname cl107
eventlog
PSU 3 InB failed
PSU 3 Input failed
PSU 2 Input failed
PSU 1 Input failed
PSU 1 InB failed
PSU 2 Input failed
PSU 3 Input failed
PSU 2 InB failed
PSU 3 InB failed
power on
first fatal error ( I open the box and see the FAN 1 is running fine.)
Fan 1 failed
lom>
lom>environment
Fault OFF
Alarm1 OFF
Alarm2 OFF
Alarm3 ON
Fans:
1 OK speed 50%
2 OK speed 60%
3 OK speed 58%
4 OK speed 58%
PSUs:
1 InB failed
2 InB failed
3 InB failed
This Netra has DC power with A and B. A power is on, B if off. I even plug in both A and B. Still can't pass LOM.
Thus I need your help.
Thanks,
TE-
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:37:56 EDT