From: Lineberger, Aaron (alineberger@navcirt.navy.mil)
Date: Thu Dec 01 2005 - 17:14:19 EST
All,
I have a Solaris 9 V880 with Multipathed internal FC drives and two of
these drives make up my root mirror. I'd like to set my boot-device to
include all 4 paths to the two drives but I'd like to validate the
correct syntax to do this. Documents that I have seen that cover this do
not deal with FC drives.
What I do know concerning the two disks:
#luxadm display 500000E0102EA990
DEVICE PROPERTIES for disk: 500000E0102EA990
Status(Port A): O.K.
Status(Port B): O.K.
Vendor: FUJITSU
Product ID: MAN3735F SUN72G
WWN(Node): 500000e0102ea990
WWN(Port A): 500000e0102ea992
WWN(Port B): 500000e0102ea991
Revision: 0704
Serial Num: 000305V96788
Unformatted capacity: 70007.195 MBytes
Read Cache: Enabled
Minimum prefetch: 0x0
Maximum prefetch: 0x0
Location: In slot 1 in the enclosure named: FCloop
Device Type: Disk device
Path(s):
/dev/rdsk/c11t500000E0102EA990d0s2
/devices/scsi_vhci/ssd@g500000e0102ea990:c,raw
Controller /devices/pci@8,600000/SUNW,qlc@2/fp@0,0
Device Address 500000e0102ea991,0
Host controller port WWN 21000003ba2cbb88
Class primary
State ONLINE
Controller /devices/pci@9,600000/pci@1/SUNW,qlc@4/fp@0,0
Device Address 500000e0102ea992,0
Host controller port WWN 210100e08b297e0c
Class primary
State ONLINE
#luxadm display 500000E0102A7D00
DEVICE PROPERTIES for disk: 500000E0102A7D00
Status(Port A): O.K.
Status(Port B): O.K.
Vendor: FUJITSU
Product ID: MAN3735F SUN72G
WWN(Node): 500000e0102a7d00
WWN(Port A): 500000e0102a7d02
WWN(Port B): 500000e0102a7d01
Revision: 0704
Serial Num: 000304V84786
Unformatted capacity: 70007.195 MBytes
Read Cache: Enabled
Minimum prefetch: 0x0
Maximum prefetch: 0x0
Location: In slot 0 in the enclosure named: FCloop
Device Type: Disk device
Path(s):
/dev/rdsk/c11t500000E0102A7D00d0s2
/devices/scsi_vhci/ssd@g500000e0102a7d00:c,raw
Controller /devices/pci@8,600000/SUNW,qlc@2/fp@0,0
Device Address 500000e0102a7d01,0
Host controller port WWN 21000003ba2cbb88
Class primary
State ONLINE
Controller /devices/pci@9,600000/pci@1/SUNW,qlc@4/fp@0,0
Device Address 500000e0102a7d02,0
Host controller port WWN 210100e08b297e0c
Class primary
State ONLINE
And the current boot-device setting is:
boot-device = /pci@8,600000/SUNW,qlc@2/fp@0,0/disk@w500000e0102a7d01,0:a
/pci@8,600000/SUNW,qlc@2/fp@0,0/disk@w500000e0102a7d01,0:d
(Not sure why the above one is in here; if :d refers to partition 3
that's a swap partition)
/pci@8,700000/scsi@4/disk@0,0:d
(Not sure why the above one is in here; there is no scsi@4 directory
listed under OBP)
disk net
I'm guessing my new boot-device settings should be:
/pci@8,600000/SUNW,qlc@2/fp@0,0/disk@w500000e0102a7d01,0:a
/pci@9,600000/pci@1/SUNW,qlc@4/fp@0,0/disk@w500000e0102a7d02,0:a
/pci@8,600000/SUNW,qlc@2/fp@0,0/disk@w500000e0102ea991,0:a
/pci@9,600000/pci@1/SUNW,qlc@4/fp@0,0/disk@w500000e0102ea992,0:a
If anyone has done this and can validate my thinking I'd be grateful.
And if anyone can explain why the suspected swap partition would be
listed as a boot-device that'd bee cool too. ;)
-
Aaron Lineberger
alineberger@navcirt.navy.mil
NAVCIRT System Administrator
(757) 417-7957 x8
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:37:17 EDT