From: Joel Langlois (jlanglo@globetrotter.net)
Date: Tue Nov 22 2005 - 08:19:29 EST
I had to open a case at SUN for this problem! Here is the info that Sun
engineer gave me...Hope this help someone.
Original message:
> Hi all!
>
> I installed a cluster with: two v440, dual hba on each server, one
> 3510 with two RAID ctrl, solaris9, sun cluster 3.1, traffic manager.
> Common setup i think.
>
> I use SVM to create diskset with the LUN of the 3510 in it! Now i
> create a ufs over this device (for oracle stuff), let say
> /dev/global/rdsk/d1s0 (this is the did device corresponding to the
> hardware LUN). I put an entry in vfstab with the /dev/global namespace
> to mount this ufs.
> vfstab: /dev/global/dsk/d1s0 /dev/global/rdsk/d1s0 /dboracle9
> ufs 2 yes global
>
> When i reboot the cluster, the device group does not come online??? I
> have two take the ownership manually of the metaset to bring the
> device group online (metaeset -s dgora -t).
>
> My second attempt was to create a metadevice over the did device in
> the metaset. So metainit -s dgora 1 1 d200 /dev/global/rdsk/d19s0.
> After i use this d200 in the vfstab and everyting work correctly.
> vfstab: /dev/md/dgora/dsk/d200 /dev/md/dgora/rdsk/d200 /dboracle9
> ufs 2 yes global
>
> My question is why i have to create a metadevice if i have a raid
> hardware (3510). Did i miss something?
>
> Thanks for help.
First answer Sun engineer:
>
>
> Email primary and alternate contacts when a Sun engineer updates this
> Service Request: No
> Sun Engineer 18-Nov-05 1:24:17 PM, Mountain Standard Time (MST GMT-07:00)
> Joel,
> I spoke to a cluster backline. He indicated it must be a metadevice
> created within the diskset, for the cluster to understand what device
> it needs to use. I've included the document below as an example.
> re:
> Jerry
>
>
> >> Document Audience: SPECTRUM
> >> Document ID: 80827
> >> Title: How to create a cluster file system using a metadevice on
> Sun[TM] Cluster 3.x
> >> Update Date: Wed Mar 30 00:00:00 MST 2005
> >> Products: Sun Cluster 3.1 Software, Sun Cluster 3.0 Software,
> Solaris Volume Manager Software, Solstice DiskSuite 4.2 Software
> >> Technical Areas: LVM (Logical Volume Management), Clustering
> >>
> >> Keyword(s):mediator, mediator host, cluster, suncluster, solaris
> volume manager, solstice disksuite.
> (((I cut the document here, this was a standard documentation on how
> to create a cluster filesystem........
Me again:
> Customer 21-Nov-05 7:23:18 AM, Mountain Standard Time (MST GMT-07:00)
> Preferred Method of Response: Email
> Hello!
>
> I have a 3510 with two raid hardware ctrl! If i use SVM over it what
> is the overhead (in term of performance) that this metadevice add???
>
> Is creating a metadevice is the common way of using a 3510 with hard
> ctrl or do you recommend another procedure for that kind of storage.
>
> Thanks.
Second Answer from Sun enginner (case close)
> Sun Engineer 21-Nov-05 10:30:53 AM, Mountain Standard Time (MST
> GMT-07:00)
> I spoke to a backline on this. He didn't believe there would be a
> performance issue using SVM. But, I showed him your email, and he's
> wondering if you want to just use the 3510 LUN to mount the file
> system without using a diskgroup at all. I may have misunderstood you
> at first. If this is the case, and you have only one LUN, you could use:
>
> /dev/did/dsk/dXsX /dev/did/rdsk/dXsX /<mountpoint> - - no global, logging
>
>
> If you have more than one LUN, you'll need to create a metaset.
>
-- Joel Langlois Analyste, Administration des systhmes Telus Quibec joel.langlois@telusquebec.com tel.:(418) 722-5655 _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:37:08 EDT