From: Karoly VEGH (karoly.vegh@eunet.co.at)
Date: Mon Nov 21 2005 - 16:13:57 EST
Hi,
I would like to clone solaris installations - e.g. I would like to
remove one disk from a complete installation from a raid1 device,
put it into another machine, boot from it, sync it up in raid1 again
with a third disk.
I am using solaris 10 and I am not quite sure about the right way to do
this.
I have the following metadevices:
root@datapool:~# metastat -p
d60 -m d61 d62 1
d61 1 1 c0t0d0s6
d62 1 1 c0t1d0s6
d50 -m d51 d52 1
d51 1 1 c0t0d0s5
d52 1 1 c0t1d0s5
d40 -m d41 d42 1
d41 1 1 c0t0d0s4
d42 1 1 c0t1d0s4
d30 -m d31 d32 1
d31 1 1 c0t0d0s3
d32 1 1 c0t1d0s3
d10 -m d11 d12 1
d11 1 1 c0t0d0s1
d12 1 1 c0t1d0s1
d0 -m d1 d2 1
d1 1 1 c0t0d0s0
d2 1 1 c0t1d0s0
root@datapool:~#
Question #1: what is the right way to remove the disk? do I have to do a
metadetach on every metadevice? what happens to the metadb
replicates?
Question #2: Could this be done without halting/rebooting the system to
be cloned?
Question #3: from a Netra T1 105 I would like to put the disk to an
e220r - do I have to think about thins regarding the
hardware differences?
any help is appreciated,
charlie
-- Vigh Karoly - EUnet Telekom GmbH - Team Systems Nussdorfer Ldnde 23, A-1190 Wien, Vienna, Austria http://www.eunet.at Tel: +43 (0) 591590 / Fax: +43 (0) 591593001 see Disclaimer http://www.eunet.at/signatur/ _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:37:07 EDT