From: Asiye Yiğit (Asiye.Yigit@gantek.com)
Date: Wed Nov 16 2005 - 03:52:13 EST
Hi All,
I have Sun Java WorkStation w2100z. It contains "nVIDIA Quadro FX3000".
I have found the following on the release note of the w2100z. The system
has Red Hat AS 3.0.
************************************************************************
**************************************************
Linux NVIDIA Drivers
Do not install older NVIDIA Linux display driver versions 1.0-5336
(32-bit) and 1.0-5332 (64-bit) and earlier, which are available on the
NVIDIA web site. These driver versions cause the Sun Java Workstation
W1100z or W2100z to lock up.
Use the NVIDIA drivers available on the Sun Java Workstation W1100z and
W2100z Supplemental CD. You can also use NVIDIA drivers that are later
than 1.0-5336.
************************************************************************
**************************************************
I have done the above requirement. However, the application is still
hanging.
In fact, when I use the native driver coming from the OS, the
application
Does not hang. However, the native driver can not support dual-
monitors.
The nvidia driver allows to set dual monitors. However, the application
hangs.
Do you know something about that? Could you suggest somewhere to ask
This question?
I would appreciate if you help me.
Regards,
Asiye
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:36:47 EDT