SUMMARY : SunFire V40z Console Redirection to SP

From: g@ry
Date: Mon Nov 07 2005 - 15:38:20 EST

• Next message: shenanigans: "[OTAnn] Feedback"
• Previous message: Richard Walton: "Flarcreate only on an /opt subdirectory"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Thanks to all the gurus that have provided their input... It really helped
aloooooooooooooooooooot... (^-^)

Thanks !
Gary

1. Enable console redirection in the BIOS:

        A. Boot or reboot the server.

        B. When prompted, press <F2> to enter BIOS setup.

        C. Select the Advanced menu from the category selections along the
top.

        D. Select Console Redirection.

2. Modify some settings in the OS:

        A. Edit the /etc/grub.conf (to allow the OS messages to pass thru
console):
                -comment out the 'splashimage'

                -add 'serial -unit=1 --speed=9600'
                -add 'terminal --timeout=1 console serial'
                -append to the kernel line, 'console=tty0
console=ttyS0,9600n8'
                -See InfoDoc 71430 for additional explanation

        B. Edit the inittab (to allow console login):
                -add 'co:2345:respawn:/sbin/agetty -t 60 ttyS0 9600 vt100' to
the end of the second-to-last section of the config
                -See InfoDoc 74452 for additional explanation

        C. Make sure that the /etc/securetty file contains:

                -ttyS0

3. Reboot the platform OS, so that these changes will take affect.

4. ssh or telnet to SP and run "platform console"
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers

• Next message: shenanigans: "[OTAnn] Feedback"
• Previous message: Richard Walton: "Flarcreate only on an /opt subdirectory"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:35:02 EDT