e450 with src/p raid card not showing all hdds

From: amit vats (er_amit_vats@yahoo.com)
Date: Fri Sep 23 2005 - 09:01:43 EDT

• Next message: Laurence Moughan: "Jumpstarting Primepowers"
• Previous message: prabhu s: "Reboot failure II"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

hi all
 
pls help me on problem.
I am having 1 e450 server with 10 hdd's . 4 are connected with on board controller but other 6 are connected with SRC/P RAID controller card. when I run the probe-scsi command at OK prompt it shows only 4 drives connected with onboard controller. But I am not able to see the hdd's connected with RAID card. Surprisingly when I run probe-scsi-all it shows 4 drives + 1 drives with vendor name fujitsu and one with name disk which arae on RAID card via back plane, but still not able to see all the HDD, The drives in e450 are perfectly alright.
 
thanks in advance
 
amit vats

                
---------------------------------
Yahoo! for Good
 Click here to donate to the Hurricane Katrina relief effort.
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers

• Next message: Laurence Moughan: "Jumpstarting Primepowers"
• Previous message: prabhu s: "Reboot failure II"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:31:44 EDT