From: Piszcz, Justin (jpiszcz@servervault.com)
Date: Fri Sep 02 2005 - 13:06:52 EDT
All,
I have spent 7 hours on this, I finally found the problem.
The problem is the card is a Sun card.
This was determined by running the following command:
bash-3.00# prtpicl -v > /tmp/a
The 0x10a states it's a QLogic board with *SUN* firmware, this means,
after all of this, we use the qlc driver and cfgadm -c to configure the
tape drives on the brocade, wow.
SUNW,qlc (scsi-fcp, 650000051c)
:DeviceID 0x1
:UnitAddress 1
:vendor-id 0x1077
:device-id 0x2312
:revision-id 0x2
:subsystem-vendor-id 0x1077
:subsystem-id 0x10a
:min-grant 0x40
:max-latency 0
:cache-line-size 0x10
:latency-timer 0x40
:interrupts 00 00 00 01
:class-code 0xc0400
:devsel-speed 0x1
The 0x10a subsystem id represents a Sun card. Thus, the qlc driver is
the correct driver and I should not even *touch* the qla2300 driver.
Thanks to all who have helped.
Justin.
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:31:31 EDT