From: George Kahler (george@yorku.ca)
Date: Fri Sep 02 2005 - 11:35:29 EDT
Many thanks to every one who replied,
the builtin LSI controller does not show any progress indicator
when syncing disks, ie '% complete'; there is no extra arg to the
'raidctl' cmd that will cause a progress indicator to be displayed.
only two of the four internal disks can be mirrored with the
builtin hardware RAID controller, the other 2 internal disks
can be mirrored with SVM.
George
On Mon, 15 Aug 2005 11:29:33 -0400 (EDT), George Kahler <george@yorku.ca> wrote:
> I have bunch of newly bought V440 servers and am keen on using the
> Hardware Mirroring feature.
>
> One thing I have noticed that there does not seem to be any indication
> of a progress when rebuilding/syncing the disks.
>
> Q:
> o does anyone know where I can get more information on this
> hardware feature ?
>
> o is there a way to see the progress when it is syncing disks ?
>
> o after a server is built and mirroring is active, can one disk
> be pulled out and used in another server as a base for that new
> system ? I've been doing this with DiskSuite for some time now but
> an not sure how this will work under hardware mirroring.
>
> o does anyone have any good or bad things that in regards to
> hardware mirroring that might help me ?
>
> Thanks.
> George
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:31:29 EDT