From: Gabel Martin (martin.gabel@siemens.com)
Date: Tue Aug 30 2005 - 11:00:07 EDT
Hi everyone,
I desperately trying to get my jumpstart server to work. It's a Sol 10
machine but it's distributing Sol 8 to the machines. However, I configured
the whole thing according to sun's (and other) documents describing the
setup. when I "boot net - install" the box tftp fine and start installing
the packages.
But after the packages it responds: "en_US ia not a valid system locale" and
beaks the automatic installation to jump into the interactive. I've surfed
through the internet but could only find documents describing en_US as the
default system_locale in the sysidcfg.
Here is my sysidcfg:
system_locale=en_US
name_service=NONE
network_interface=PRIMARY {hostname=server1 protocol_ipv6=no
ip_address=192.168.10.23 netmask=255.255.255.0 default_route=192.168.10.254}
timezone=MET
terminal=vt100
timeserver=localhost
root_password=XXXXXXXX
security_policy=NONE
Does anyone have any idea why the jumpstart won't accept the en_US ?
TIA
martin
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:31:26 EDT