From: Randall Cruz (ercruzv@gmail.com)
Date: Wed Aug 24 2005 - 21:00:36 EDT
Thanks a lot to Andrew Hall. You hit exactly in the target!
Here was my question:
I need to install 460 pcs with Solaris 10 3/05. My Boot and Install Server
are based on a Ultra Sparc 250 system.
If a install any PC using rarp everything works perfect. The pc is installed
automatic using the configuration store in the sysidcfg, etc, etc
But here is the problem. All the 460 pc need to be installed using DHCP and
PXE procedure.
The pc boot from the net perfect, but I do not why ignores the sysidcfg and
start a interactive install.
I have done:
- ran the add_install_client
- checked the files in /tftpboot
- added a macro to my DHCP server
- added a PXE macro to my DHCP server
- added a client entry which includes the network_ip macro
- added all the vendor options to the network_ip macro
Solution:
Create a file "system.conf" file under the /etc/netboot under de jumpstart
directory tree and add the following entries to the system configuration
file:
SsysidCF="JumpStart-Sever:/wrk/jumpstart"
SjumpsCF="JumpStart-Server:/wrk/jumpstart"
And voila!!!!
Thanks to Andrew again!
Have a great day!
Randy C.
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:31:23 EDT