Reenabling "terminal emulation" on a StorEdge 3511?

From: Dan Stromberg (strombrg@dcs.nac.uci.edu)
Date: Mon Aug 22 2005 - 12:20:53 EDT

• Next message: Dan Stromberg: "Quick RAID 5 initialization"
• Previous message: Helmut Kreft: "SUMMARY: "prtconf -vp" missing disk slots"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

I was poking around for serial parameters to tweak to improve the serial
communications between our Linux+Cyclades serial terminal concentrator
to a StorEdge 3511 RAID controller, and mistakenly tried "Turn off
terminal emulation".

Is there a way, using sccli, to turn that terminal emulation back on?

Thanks!
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers

• Next message: Dan Stromberg: "Quick RAID 5 initialization"
• Previous message: Helmut Kreft: "SUMMARY: "prtconf -vp" missing disk slots"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:31:21 EDT