From: Jeremy Ahl (Jeremy.Ahl@vivista.co.uk)
Date: Mon Aug 22 2005 - 04:30:25 EDT
Hi all,
Just received a pair of V880s, and put them both through jumpstart, but one
of them fails. The jumpstart server has not been changed recently, and has
been used since to successfully re-jumpstart one of our (older) V880s. It
seems to install Solaris OK, but fails when it tries to mount root when it
boots. I can boot cdrom and mount the root partition without any problems.
V880 has six internal disks, with Loop B enabled for multipathing. I can
manually install this box using the Solaris CDs, and it works fine.
Any help/ideas greatly appreciated!
Jez
Rebooting with command: boot net - install
Boot device: /pci@9,700000/network@1,1 File and args: - install
Timeout waiting for ARP/RARP packet
4000 /-\|SunOS Release 5.8 Version Generic_108528-29 64-bit
Copyright 1983-2003 Sun Microsystems, Inc. All rights reserved.
whoami: no domain name
Configuring /dev and /devices
ip_rput_dlpi(fcip0): DL_ERROR_ACK for DL_ATTACH_REQ(11), errno 8, unix 0
ip_rput_dlpi(fcip0): DL_ERROR_ACK for DL_BIND_REQ(1), errno 3, unix 0
ip_rput_dlpi(fcip0): DL_ERROR_ACK for DL_PHYS_ADDR_REQ(49), errno 3, unix 0
ip_rput_dlpi(fcip0): DL_ERROR_ACK for DL_UNBIND_REQ(2), errno 3, unix 0
ip_rput_dlpi(fcip0): DL_ERROR_ACK for DL_DETACH_REQ(12), errno 3, unix 0
Using RPC Bootparams for network configuration information.
Skipping interface ge0
Skipping interface ce2
Skipping interface ce1
Skipping interface ce0
Configured interface eri0
Searching for configuration file(s)...
Using sysid configuration file
192.168.100.50:/software/SUN/jumpstart/config/sysidcfg
The system is coming up. Please wait.
Starting remote procedure call (RPC) services: sysidns done.
Starting Solaris installation program...
Searching for JumpStart directory...
Using rules.ok from 192.168.100.50:/software/SUN/jumpstart.
Checking rules.ok file...
Using profile: config/Sun-Fire-880-72GB
Using finish script: scripts/Finish_script
Executing JumpStart preinstall phase...
Searching for SolStart directory...
Checking rules.ok file...
Using begin script: install_begin
Using finish script: patch_finish
Executing SolStart preinstall phase...
Executing begin script "install_begin"...
Begin script install_begin execution completed.
Processing default locales
- Specifying default locale (en_GB)
Processing profile
- Selecting cluster (SUNWCXall)
Installing 64 bit Solaris packages
- Selecting locale (en_GB)
- Selecting all disks
- Configuring boot device
- Configuring / (c1t0d0s0)
- Configuring swap (c1t0d0s1)
- Configuring /var (c1t0d0s3)
- Configuring /opt/apps (c1t0d0s4)
- Deselecting unmodified disk (c1t1d0)
- Deselecting unmodified disk (c1t2d0)
- Deselecting unmodified disk (c1t3d0)
- Deselecting unmodified disk (c1t4d0)
- Deselecting unmodified disk (c1t5d0)
- Deselecting unmodified disk (c2t0d0)
- Deselecting unmodified disk (c2t1d0)
- Deselecting unmodified disk (c2t2d0)
- Deselecting unmodified disk (c2t3d0)
- Deselecting unmodified disk (c2t4d0)
- Deselecting unmodified disk (c2t5d0)
Verifying disk configuration
- WARNING: Unused disk space (c1t0d0)
- WARNING: Change the system's default boot device in the EEPROM for
hands-off rebooting
Verifying space allocation
- Total software size: 849.24 Mbytes
Preparing system for Solaris install
Configuring disk (c1t0d0)
- Creating Solaris disk label (VTOC)
Creating and checking UFS file systems
- Creating / (c1t0d0s0)
- Creating /var (c1t0d0s3)
- Creating /opt/apps (c1t0d0s4)
Beginning Solaris software installation
Starting software installation
SUNWrdm.....done. 849.23 Mbytes remaining.
<snip>
SUNWrsgk....done. 1.00 Mbytes remaining.
Completed software installation
Solaris 8 software installation succeeded
Customizing system files
- Mount points table (/etc/vfstab)
- Unselected disk mount points
(/var/sadm/system/data/vfstab.unselected)
- Network host addresses (/etc/hosts)
Cleaning devices
Customizing system devices
- Physical devices (/devices)
- Logical devices (/dev)
Installing boot information
- Installing boot blocks (c1t0d0s0)
Installation log location
- /a/var/sadm/system/logs/install_log (before reboot)
- /var/sadm/system/logs/install_log (after reboot)
Installation complete
WARNING: CHANGE DEFAULT BOOT DEVICE
If you want the system to always reboot Solaris from
the boot device that you've specificed (c1t0d0s0),
you must change the system's default boot device using
the eeprom(1M) command after installing Solaris software.
Executing SolStart postinstall phase...
Executing finish script "patch_finish"...
Finish script patch_finish execution completed.
Executing JumpStart postinstall phase...
Executing finish script "scripts/Finish_script"...
Finish script scripts/Finish_script execution completed.
The begin script log 'begin.log'
is located in /var/sadm/system/logs after reboot.
The finish script log 'finish.log'
is located in /var/sadm/system/logs after reboot.
# syncing file systems... done
rebooting...
Resetting ...
Sun Fire 880, No Keyboard
Copyright 1998-2004 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.13.0, 16384 MB memory installed, Serial #60497659.
Ethernet address 0:3:ba:9b:1e:fb, Host ID: 839b1efb.
Rebooting with command: boot
Boot device: disk File and args:
SunOS Release 5.8 Version Generic_108528-29 64-bit
Copyright 1983-2003 Sun Microsystems, Inc. All rights reserved.
configuring IPv4 interfaces: eri0.
Hostname: cu50as001
mount: /dev/dsk/c1t0d0s0 is not this fstype.
failed to open /etc/coreadm.confConfiguring /dev and /devices
syseventd: Unable to open daemon lock file '/etc/sysevent/syseventd_lock':
'Read-only file system'devfsadm: mkdir failed for /dev 0x1ed: Read-only fil
e system
devfsadm: open failed for /dev/.devfsadm_dev.lock: Read-only file system
Configuring the /dev directory (compatibility devices)
/etc/rcS.d/S50devfsadm: /tmp/sock2path.57: cannot create
INIT: warning: cannot open /etc/initpipe.
The system is coming up. Please wait.
/sbin/mountall: /tmp/sh830: cannot create
rm: Unable to remove directory /tmp: Read-only file system
mkdir: Failed to make directory "/tmp"; Read-only file system
chown: /tmp: Read-only file system
Configuring network interface addresses: eri0.
/etc/rc2.d/S47pppd: Solaris PPP has not been correctly installed on
/etc/rc2.d/S47pppd: this system. Required files are missing.
/etc/rc2.d/S69inet: /tmp/ifconfig.150: cannot create
grep: can't open /tmp/ifconfig.150
/etc/rc2.d/S69inet: test: argument expected
starting rpc services: rpcbind done.
cp: cannot create /tmp/init.orig: Read-only file system
Due to an internal error, this process cannot set the superuser password at
this
time. After the system is booted, you should immediately log in as root and
set
the password by running the program `/bin/passwd'.
The error that occurred was: list_ufs_db:: The /etc/passwd table is busy
Press Return to continue
_____________________________________________________________________
This message has been checked for all known viruses on behalf of Vivista by MessageLabs.
http://www.messagelabs.com or Email: mailsweeper.info@vivista.co.uk
Vivista formerly Securicor Information Systems for further information http://www.vivista.co.uk
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:31:21 EDT