Virtual Interfaces and IPMP

From: Iain Miller (iainonthemove@gmail.com)
Date: Thu Aug 18 2005 - 10:02:09 EDT

• Next message: arava.kumar@flextronicssoftware.com: "Fw: Solaris Multithreaded Application Hang"
• Previous message: Keep_the_faith: "Replacement for JNI"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi Guys,

Should be a quick one for someone with good IPMP experience, but does
anyone know if I can run multiple IPMP groups on the same interfaces?
I plan on running IPMP in active/standby mode.

i.e.

I want to create a "VIP" IP 10.100.1.1 on bge0 with "PRIVATE" IP on
bge0 of 10.100.1.2 and another "PRIVATE" IP on bge1 of 10.100.1.3.
These interfaces will be a member of group 1subnet.

I then want to create another "VIP" IP 10.100.2.1 again on bge0 with
"PRIVATE" IP on bge0 of 10.100.2.2 and another "PRIVATE" IP on bge1 of
10.100.2.3. The interfaces will be a member of group 2 subnet.

I know I could create the second group on a second pair of NIC's but I
don't have spare NIC's at this time :-(

Any thoughts / suggestions?

I will summarise.

Thanks in advance,

Iain.

--
Iain Miller
iainonthemove@gmail.com
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers

• Next message: arava.kumar@flextronicssoftware.com: "Fw: Solaris Multithreaded Application Hang"
• Previous message: Keep_the_faith: "Replacement for JNI"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:31:20 EDT