SUMMARY: DAT 72 tape drive (hits end of tape)

From: Carolyn Mayr {ITSD/CS} (carolyn@cs.usna.edu)
Date: Tue Aug 16 2005 - 13:26:55 EDT


Thank you to:

Ian Pease
Tim Chipman
James Scott
Bill R. Williams
Eugene Schmidt
Dave Mitchell

Changing my dump parameter to "1cn" solved the problem. I did a
test dump and it worked for the DAT 72. Appreciate all of your
quick responses. Thank you again.

                        Carolyn Mayr
                        
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Carolyn Mayr (IT Specialist/UNIX sysadm) Voice: 410-293-6808 (sec-6800)
Computer Science Department, DivMath&Sci Email: carolyn@cs.usna.edu
572M Holloway Road, Michelson Hall, 9F FAX: 410-293-2686
U.S. Naval Academy WWW: http://www.cs.usna.edu
Annapolis, MD 21402-5002 USNA: 410-293-1000
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

                        
------------- Begin Forwarded Message -------------
Date: Tue, 16 Aug 2005 07:21:54 -0400 (EDT)
From: Carolyn Mayr {ITSD/CS} <carolyn@cs.usna.edu>
Subject: DAT 72 tape drive (hits end of tape)
To: sunmanagers@sunmanagers.org
Cc: carolyn@cs.usna.edu

I have a SunFire V480 (Solaris 9) and I just attached a brand new
Sun StorEdge DAT 72 tape drive. I am using DDS-4 20/40GB tapes.
Here's my dump parameters:

/usr/sbin/ufsdump 0uf /dev/rmt/1hn /dev/dsk/c1t0d0s0

It keeps hitting the end of tape after about 20GB. Prior to
attaching the DAT 72 drive, I was using a Sun DDS-4 drive with
the exact same dump parameters and was dumping over 32GB on
the same tape.

Other than a boot -r, I did not change any dip switches or st.conf
parameters. What could be the problem?
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers



This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:31:19 EDT