From: Balasubramanian Rajagopalan (brajagop@cisco.com)
Date: Tue Jun 25 2002 - 11:11:14 EDT
Hi all
I have a Netra X1 Server with solaris 2.8 installed on it.
It was working fine with one of its interface configured.
Very recently i tried to configure the other interface "dmfe1".
something went wrong and now i am unable to access the server.
Able to ping but could not open a telnet session.
then i tried to connect through LOM from a sun workstation (Sun Blade 100)
as given in the user guide using tip /dev/term/a -9600 utility.
i got the response as "Connected". then i gave "#." but didn't get
the LOM prompt. I also tried from PC but with no sucess.
How to overcome this problem? Can anyone help me?
Thanks,
Balasubramanian Rajagopalan
Infosys Technologies Ltd
Electronics City, Hosur Road
Bangalore - 561 229, India
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:24:30 EDT