From: Z H (ssefoen@yahoo.com)
Date: Mon Aug 15 2005 - 13:42:20 EDT
Thanks to:
Rick von Richter" <rick@vonr.net>
here are the comments:
Have you tried clearing the bootprom to factory
defaults? I.e. Hold
down L1-N while powering up?
Sounds like a power problem. I would follow Sun's
recommendation - you
may not be supplying enough AMPs to the unit.
I was unable to resolve the problem yet.
Vendor has indicated the centerplane is the problem.
So replacing the centerplane is current approach.
ssefoen
-----------------------------------
Original question:
To All Helpers:
Upon booting an used V880 just received from vendor,
the system fault LED light is solid Amber after
turning on the power.
The system shows:
Error: Faulty Power Up Reset Sequence
H/W under test = Safari bus CPU 1,
motherboard/centerplane
Repair instructions: Replace item in order listed by
'H/W under test' above
END-error
CPU 1 Trap trace
The error message continue on all four CPUs.
Then show a list of debug menu:
0 peek/poke interface
1 Dump DAR error bits
...
d Do soft reset
? Help
____________________________________________________
Start your day with Yahoo! - make it your home page
http://www.yahoo.com/r/hs
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:31:18 EDT