From: Laurence Moughan (Laurence.Moughan@aerlingus.com)
Date: Thu Aug 11 2005 - 10:14:43 EDT
Hi All,
Longshot here,
I have 2 machines ( node1 - netra t1 200 and node2 netra t1 ) connected
via diff scsi to a D1000 with 2 internal 9 GB disks.
Now i wasnt to craete a metaset for simple HA of disks for an
application running on the nodes .
Have tested this in office and works fine.
However on my new nodes when i devfsadm and disks, i see the external
disks on different devices !
eg
node1
2. c3t0d0 <SUN9.0G cyl 4924 alt 2 hd 27 sec 133>
/pci@1f,0/pci@1/scsi@5/sd@0,0
3. c3t1d0 <SUN9.0G cyl 4924 alt 2 hd 27 sec 133>
/pci@1f,0/pci@1/scsi@5/sd@1,0
node2
2. c2t0d0 <SUN9.0G cyl 4924 alt 2 hd 27 sec 133>
/pci@1f,0/pci@1/pci@1/scsi@f/sd@0,0
3. c2t1d0 <SUN9.0G cyl 4924 alt 2 hd 27 sec 133>
/pci@1f,0/pci@1/pci@1/scsi@f/sd@1,0
Cause i have different name i cannot create a metaset !
Longshot here
any way to frig the deive path ? path_to_inst, or the files under
/devices on on of the nodes to be same as other ?
Thanks
Laurence
..For low fares and great deals on hotels, car hire and travel insurance visit http://www.aerlingus.com
of any action in reliance upon, this information by persons or entities
other than the intended recipient is prohibited.If you have received
this email in error please notify the sender immediately and delete
the material.
*******************************************************************************
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:31:17 EDT