From: Avalon Johnson (avalon@digilink.net)
Date: Fri Jul 08 2005 - 15:58:39 EDT
We have just bought a set of A1000 raid arrays running with raid manager
6.22.
After installation of the software, the raid shows the following state:
==============================================================================================
Group Drives Total Remaining LUN Name/ID Raid level Capacity status
1 3 104980 104980 0 0 10M Modifying - 0%
==============================================================================================
My problem is with the "modifying 0%" status. The status percentage never
changes.
Rebooting/repowering the A1000 doesn't change this.
I tried to reset the controller ...
Nothing works. The raid manager just complains that the LUN is being
modifying and we should wait until it has finished before doing anything.
Because of this, I can't reconfigure the group/lun/controller.
Anyone know how to clear this?
I have already tried clearing the /etc/osa/lunlocks. Actually I have
completely reinstalled the s/w, just in case ...
Thanks in advance.
Avalon Johnson email: avalon@digilink.net
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:31:04 EDT