From: Wade Sochka (sunmanagers@gmail.com)
Date: Thu Jul 07 2005 - 09:55:50 EDT
Hi all,
I have a question about Sunscreen configuration on a workstation
running a VPN client. Below are the details.
SunOS 5.8 Generic_117350-25 sun4u sparc SUNW,Sun-Blade-100
Cisco Systems VPN Client Version 4.6.02 (0030)
Sunscreen Lite 3.1
When I start the VPN client and do a port scan from another machine,
the firewall is bypassed and all open ports are exposed.
This is a standalone workstation, with no remote administration. No GUI
is used for configuration; I use command line only.
I have found some command line configuration examples on docs.sun.com
but I suspect that the VPN examples given are much more elaborate than
what I need.
Any tips, procedures, pointers to docs will be greatly appreciated.
Thank you.
Regards,
--Doug
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:31:03 EDT