From: Johan Hartzenberg (jhartzen@csc.com)
Date: Sun Jun 16 2002 - 12:21:23 EDT
Hi,
I had to replace SUN FCAL cards with JNI HBAs on twenty two E10,000 domains
today. On 3 of the domains the upgrade failed, on the rest the upgrade
worked fine.
The three domains giving problems are doing the same thing - see below.
> boot
Resetting...
NOTE: POST level < 16: Probe & configure mode. No diagnostic tests were
run.
SUNW,Ultra-Enterprise-10000, using Network Console
OpenBoot 3.2.126, 4096 MB memory installed, Serial #10916752.
Ethernet address 0:0:be:a6:93:90, Host ID: 80a69390.
Rebooting with command: boot
Boot device: /sbus@54,0/QLGC,isp@0,10000/sd@8,0:a File and args:
SunOS Release 5.6 Version Generic_105181-30 [UNIX(R) System V Release 4.0]
Copyright (c) 1983-1997, Sun Microsystems, Inc.
WARNING: forceload of drv/atf failed
WARNING: vxvm:vxdmp: Cannot find device number for
</sbus@54,0/QLGC,isp@0,10000/sd@8,0:a>
NOTICE: vxvm:vxio: Cannot open disk ROOTDISK: kernel error 6
Cannot mount root on /pseudo/vxio@0:0 fstype ufs
panic[cpu20]/thread=0x10404000: vfs_mountroot: cannot mount root
rebooting...
BAD TRAP: cpu=20 type=0x31 rp=0x10403700 addr=0x17 mmu_fsr=0x0
: trap type = 0x31
addr=0x17
pid=0, pc=0x100213dc, sp=0x10403790, tstate=0x80001e02, context=0x0
g1-g7: 10457800, f105b04c, 10467e70, 10467be8, 38, 104680b0, 10404000
Begin traceback... sp = 10403790
Called from 1002063c, fp=104037f0, args=1040e874 50 10457b70 10459040 14 0
Called from 1001fedc, fp=10403850, args=0 1 1040e874 ffffffff 10b55400 100
Called from 10071164, fp=104038c8, args=10404000 104039dc 10407814 10407804
8 8
Called from 10070fc4, fp=10403930, args=3 104982e4 3 104039dc 7028d400 0
Called from 100e2b04, fp=10403990, args=3 104982e4 1000 70170680 10404000 0
Called from 10091d8c, fp=104039f0, args=10494c00 c 0 104115f0 10404000
104919b8
Called from 100067b0, fp=10403a80, args=1040a624 70002000 10403ec0 10404000
ff00 fff2
Called from 10056fd4, fp=126448, args=10006634 1045973c 3c 104a3198 177124
0
End traceback...
panic[cpu20]/thread=0x10404000: trap
Dump Aborted.
Regressing does not seem to work either, restoring the old FCAL cards to
their original positions does not solve the problem!
All three of the domains where the upgrade failed are configured with 2 x
QLGC,ISP1000U and a QFE card AND the JNI card on a single systemboard. Yet
I have an equal number of identically configured domains where the upgrade
was successful.
I need help on this urgently please.
_Johan
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:24:30 EDT