From: Bhavesh Shah (bshah@citadon.com)
Date: Mon Jun 20 2005 - 13:26:21 EDT
Thanks to Bruce and Bhaskara for their suggestion.
Well as it's a striped volume (RAID 0) there was no other option then to
delete and recreate the stripe volume and restore from tape backup and
that was exactly I did and it worked.
As regards email issue the configuration was correct but Veritas didn't
send me an alert while the disk is in FAILING state but it did sent me
an email when disk was actually FAILED.
Thanks Gurus.
My original Question Was:
Hi Gurus,
I have a Bad disk (bad Media) which is running under Veritas Volume
Manager Control (Vxvm 3.2). When I try to copy files from that file
system it give me an I/O error.The volume is Stripe. Is there a way I
can recover the data by just replacing the disk or need to go through a
procedure?
1) Replace a Bad Disk
2) Delete the Stripe Volume
3) Create a new Stripe Volume
4) Restore Data from Backup
Also I had setup a vxvm-recover script to send me an email alert if
there is any failure occurs but it didn't sent me any notification. I am
able to send test email from that box but VXVM didn't sent me any alert.
Is there is any other place I need to setup email notification from
Vxvm?
Below is the output of vxrpint:
Disk group: archdg
dg archdg default default 3000 1024723131.1283.opsdb1
dm archdg01 c1t0d0s2 sliced 4711 35358848 -
dm archdg02 c1t1d0s2 sliced 4711 35358848 -
dm archdg03 c1t2d0s2 sliced 4711 35358848 FAILING
dm archdg04 c1t3d0s2 sliced 4711 35358848 -
dm archdg05 c1t5d0s2 sliced 4711 35358848 -
dm archdg06 c1t4d0s2 sliced 4711 35358848 -
sd archdg01-01 archvol-01 archdg01 0 35358848 0/0 c1t0d0
ENA
sd archdg02-01 archvol-01 archdg02 0 35358848 1/0 c1t1d0
ENA
sd archdg03-01 archvol-01 archdg03 0 35358848 2/0 c1t2d0
ENA
sd archdg04-01 archvol-01 archdg04 0 35358848 3/0 c1t3d0
ENA
sd archdg06-01 archvol-01 archdg06 0 35358848 4/0 c1t4d0
ENA
sd archdg05-01 archvol-01 archdg05 0 35358848 5/0 c1t5d0
ENA
v archvol - ENABLED ACTIVE 212152320 SELECT
archvol-01 fsgen
pl archvol-01 archvol ENABLED ACTIVE 212153088 STRIPE 6/128
RW
sd archdg01-01 archvol-01 archdg01 0 35358848 0/0 c1t0d0
ENA
sd archdg02-01 archvol-01 archdg02 0 35358848 1/0 c1t1d0
ENA
sd archdg03-01 archvol-01 archdg03 0 35358848 2/0 c1t2d0
ENA
sd archdg04-01 archvol-01 archdg04 0 35358848 3/0 c1t3d0
ENA
sd archdg06-01 archvol-01 archdg06 0 35358848 4/0 c1t4d0
ENA
sd archdg05-01 archvol-01 archdg05 0 35358848 5/0 c1t5d0
ENA
below is the snippet of vxvm-recover script:
# start the watch daemon. This sends E-mail to the administrator when
# any problems are found. To change the address used for sending
problem
# reports, change the argument to vxrelocd.
vxrelocd netops@citadon.com &
# to enable hot sparing instead of hot relocation.
# ( comment out vxrelocd before uncommenting vxspare )
Any help/Pointer will be greatly appreciated
Will Summarize.
TIA
B
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:30:56 EDT