From: Donald Maner (donjr@maner.org)
Date: Thu Jun 13 2002 - 14:38:50 EDT
Hello,
I have a Netra T1 that I think *may* have a bad ethernet port.
I am unable to get the machine to sense that the second ethernet port is
even installed. A show-devs lists:
/pci@1f,0/pci@1,1/network@1,1
As the only networking port available.
A ok setenv diag-switch? true
diag-switch? = true
ok reset-all
Shows this:
Probing /pci@1f,0/pci@1,1 at Device 1 network
Probing /pci@1f,0/pci@1,1 at Device 2 scsi disk tape
Probing /pci@1f,0/pci@1 at Device 1 pci
Notice, no /pci@1f,0,pci@1,1 at Device 3 network, which I would expect.
Espically since devalias shows this entry:
net2 /pci@1f,0/pci@1,1/network@3,1
Do I have bad hardware? Or am I missing something simple?
Thanks,
Donald
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:24:30 EDT