From: Gallagher, Kevin (K.Gallagher@napier.ac.uk)
Date: Thu Jun 09 2005 - 10:09:49 EDT
I have an Ultra 1, see below for spec which will only recognise half the
memory available in any particular memory module. I have checked that the
memory is seated correctly, all the memory is of the same type and in pairs.
Has anyone seen this type of problem before? If not I can only assume it is a
hardware fault.
System Configuration: Sun Microsystems sun4u Sun Ultra 1 SBus (UltraSPARC
143MHz)
System clock frequency: 71 MHz
Memory size: 384 Megabytes
SunOS aeetes 5.9 Generic_118558-06 sun4u sparc SUNW,Ultra-1
OBP 3.35.0 2004/04/19 12:15 POST 3.10.6 1996/10/18 10:19
Kington KTS-7001/128 memory
Kevin Gallagher
Networked Services Group
C & IT
Craiglockhart
Ext. 4248
This message is intended for the addressee(s) only and should not be read,
copied or disclosed to anyone else outwith the University without the
permission of the sender.
It is your responsibility to ensure that this message and any attachments are
scanned for viruses or other defects. Napier University does not accept
liability for any loss
or damage which may result from this email or any attachment, or for errors or
omissions arising after it was sent. Email is not a secure medium. Email
entering the
University's system is subject to routine monitoring and filtering by the
University.
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:30:52 EDT