From: Baillargeon, Sonny (Sonny.Baillargeon@bmonb.com)
Date: Tue Jun 07 2005 - 17:07:58 EDT
Guys,
Thanks for the help so far in my project. Your input has been
invaluable.
I am trying now to connect a two gigE ports to a Cisco 3750 using the
Sun Trunking 1.3 software. The sun end looks fine when I do a nettr
-conf. I can see the interfaces. The problem I seem to be having is on
the Cisco.
In the docs it says that Sun Trunk supports static mode on 802.3ad
switches. Does anybody know how to make Sun Trunking work with Cisco?
Here is my current switch configuration:
interface GigabitEthernet1/0/18
description Trunk to nygzdev2 ce2
speed auto 1000
duplex full
channel-group 5 mode active
And my config for sun trunk:
/etc/opt/SUNWconn/bin/nettr -setup 2 device=ce members=2,3 policy=1
Thanks,
Sonny
<FONT SIZE =
1>***************************************************************************
*
This e-mail and any attachments may contain confidential and privileged
information. If you are not the intended recipient, please notify the sender
immediately by return e-mail, delete this e-mail and destroy any copies. Any
dissemination or use of this information by a person other than the intended
recipient is unauthorized and may be illegal. Unless otherwise stated,
opinions expressed in this e-mail are those of the author and are not endorsed
by the author's employer.</FONT>
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:30:51 EDT