From: sanjay K (sanjayk@sunguru.com)
Date: Tue Jun 07 2005 - 11:42:50 EDT
Hi All,
I have one cluster setup to install with V880 & V480 node having StorEdge
(3510 with cascade of one 3510, to form a total 20 disks ) as common
shared storage & terminal concentrator. I have facing two problems
1) The storage is physically conncted to Fiber host bus adapter on both
the nodes. I am finding it is getting recognised on only one node at a
time. pls. suggest to get it recognise on both the nodes. i am aware for
the scsi storage it is require to change the scs-initiator-id on one of
the node. but for this fiber storage , what is the procedure? or any
connection issue on the rear of 3510?
2) I had configured the tc i) Ip address to port 1 (192.168.80.11)
(ii)set port=1 type hardwired mode cli (iii)set port=2-8 type dial_in
mode slave
after this rebooted the tc.
i am able tenet to port 1 & access the admin port 1 ; but i am not
getting the serial console access of servers on port 2 & 3 & above (
issusing commnad as # telnet 192.168.80.11 5002 & # telnet
192.168.80.11 5003).
Kindly suggeset
Thanks in advance
sanjay
Thanks & Advance
sanjay
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:30:51 EDT