From: Adam Levin (levins@westnet.com)
Date: Tue Jun 07 2005 - 09:59:59 EDT
I've got a Sun Blade 100 workstation running Solaris 8 on my desk. I run
CDE (version 1.4) on it.
Last Friday, I did a "reload workspace manager", and my front panel switch
went wiggy, so I tried logging out and logging back in.
I get an error:
--- The DT messaging system could not be started. To correct the problem: 1) Choose OK to return to the login screen 2) Select failsafe session from the login screen's option menu and log in. 3) Check to see that the hostname is correct in these locations: /etc/src.sh /etc/hosts /usr/adm/inetd.sec For additional information, see the DT User's Guide. --- /etc/hosts is correct, but /etc/src.sh and /usr/adm/inetd.sec don't exist and never have. I decided since the system wasn't working I'd go ahead and install the latest patchcluster, which I did. I'm still getting the problem. Some google research shows that the error can be misleading, and that rpc must be running. In my case, however, rpcbind *is* running. There's a ToolTalk line in inetd.conf. I've tried both with and without this service commented out, same results. I cannot log in as my usual user, but root can log in under CDE. I can log in fine on the console. So, some permission must be screwy somewhere? Has anyone seen this problem before? -Adam _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:30:51 EDT