From: mahdi_farah@sympatico.ca
Date: Fri Jun 21 2002 - 14:02:23 EDT
Hi everyone
I have Sun Workstaion and here's the description:
SUN UltraSPARC 60 UPA/PCI (UltraSPARC II 300MHz))
OBP 3.32 2001/07/25
POST 2.0.3
Speed:- CPU: 296.00MHz
UPA: 098.66MHz
PCI:BUSA: 66MHz
PCI:BUSb 33MHz
Insalled this operating system with the latest patches.
SunOS Solaris8 5.8 Generic-108528-07 SUN4U SPARC
SUNW,Ultra-60.
Then used it Boot -r.
Replaced the CPU 300MHZ with 450MHz and set the Clock-speed jumper (J3001) with 2+3 according to manual.
The system is starting but nothing come out on the screen.
Any suggestion...pls.
Thanks in Advance.
I want to upgrade the CPU 300MHz to 450MHz. Here's the dis...
SUN UltraSPARC 60 UPA/PCI (UltraSPARC II 300MHz)
After I have replaced the CPU 300MHz with 450MHz and set the clock-speed
jumper setting with "2+3" for the J3001 according to the manual. Then I
tried to restart the system, but I couldn't able to start it.
Would you please give me your advise. What should I do or tell me if I have
missed it any steps.
Your advice will be appreciated.
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:24:29 EDT