From: PSI (sipark_m@fineit.net)
Date: Mon May 30 2005 - 21:11:57 EDT
Thatnks for many replies.
Special Thanks for Rich Teer, Colin Bigam, Olaf Bohlen...,
For install a Solaris 10, minimum hardware requirements UltraSPARC II CPU and Ultra 2 system.
Because solaris 10 system is only 64bit system, hardware system must 64bit system.
32bit SPARC system not used solaris 10 OS.
Thanks & Regards,
PSI.
----- Original Message -----
From: "PSI" <sipark_m@fineit.net>
To: "Sun Managers" <sunmanagers@sunmanagers.org>
Sent: Tuesday, May 31, 2005 12:24 AM
Subject: [UPDATE] Can I install solaris 10 on a SPARCstation20 ?
> Thanks for many replies.
>
> I checked platform list through follow links :
> http://docs.sun.com/source/817-6337/chapterHPG.html
>
> But, I have expectation because "Minimum Hardware Requirements" of "System Requirements" of follow link :
> http://www.sun.com/software/solaris/specs.jsp
>
> Minimum Hardware Requirements
> Proper installation of Solaris 10 requires a SPARC-based or x64/x86-based system with:
>
> a.. Minimum of 256 MB of physical RAM (or 512 MB for PXE booting)
> b.. Minimum of 2 GB of available hard drive space
> c.. For SPARC platform-based processors, 250-MHz minimum
> d.. For x64- or x86-based processors, 120-MHz minimum
> e.. DVD or CD-ROM drive
>
> "For SPARC platform-based processors, 250-MHz minimum"
>
> SS20 is not included Supported Sun SPARC Platform for solaris 10 installed,
> but, I thought that the requirements "Minimum Hardware Requirements".
>
>
>
> Thanks & Regards,
> PSI
>
>
> ----- Original Message -----
> > From: "PSI" <sipark_m@fineit.net>
> > To: "Sun Managers" <sunmanagers@sunmanagers.org>
> > Sent: Monday, May 30, 2005 11:14 PM
> > Subject: Can I install solaris 10 on a SPARCstation20 ?
> >
> >
> > > Gurus.,
> > >
> > > I hope to install a solaris 10 on a SPARCstation 20. I saw Supported Sun
> > > SPARC Platform for solaris 10 installed.
> > >
> > > Follow link is it :
> > > http://docs.sun.com/source/817-6337/chapterHPG.html
> > >
> > > But, I download for solaris install. then is CD Burning(Using Nero Burning 5.x).
> > > and Insert Volume 1 CD to cdrom of SS20. Follow messages is display at my
> > > monitor of PC throught serial cable.
> > >
> > > <#0> ok boot cdrom
> > > Can't read disk label.
> > > Can't open disk label package
> > >
> > > Can't open boot device
> > >
> > >
> > > Is it impossible that install on SPARCstation 20 ?
> > >
> > >
> > >
> > > Thanks & Regards,
> > > PSI
> > > _______________________________________________
> > > sunmanagers mailing list
> > > sunmanagers@sunmanagers.org
> > > http://www.sunmanagers.org/mailman/listinfo/sunmanagers
> _______________________________________________
> sunmanagers mailing list
> sunmanagers@sunmanagers.org
> http://www.sunmanagers.org/mailman/listinfo/sunmanagers
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:30:46 EDT