SUMMARY: 280R hangs during boot with VxVM installed

From: NKS (sunadmin@norsar.no)
Date: Mon May 30 2005 - 02:14:07 EDT


Original post:

> Fellow Managers,
>
> Sun280R, Solaris 9, latest rec. patches. 118558-05. Veritas 4.0 MP1.
> Encapsulated root disk. Two internal OS disks. Sun Ultra SCSI dual
> LVD controller. Nexsan Ataboy2 SCSI RAID-disk (LUNs 4 & 5) attached,
> one on each SCSI channel. /kernel/drv/sd.conf updated.
>
> Server hangs during boot after VxVM inst. and disk encapsulation,
> both singe and multiuser...
>
> Last boot-message on display:
>
> NOTICE: VXVM vxdmp V-5-0-34 added disk array DISKS, datatype = Disk

Solution:

Downgrade to Solaris 8, latest recommended patches. Kernel version
Generic_117350-24

Thanks to Mark Ebaugh for pointing me in the right direction:

> I have had a similar issue that is caused by a remote storage device
> that do not understand persistent reserve and release, and current
> versions of Veritas for Solaris rely on this optional feature of the
> SCSI spec. I have a very different set up than you are using, but the
> symptoms are very similar.
> Unfortunately the fix in my case is waiting on a firmware release from
> the storage vendor.

Best regards,

Nils
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers



This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:30:46 EDT