From: Anjan Dave (adave@vantage.com)
Date: Tue May 24 2005 - 21:58:48 EDT
The volume reconstruction from standby disk to disk 1 worked fine.
<t3>vol recon u1d1 from_standby
Many thanks to "NO UCE" (don't know his name) for suggesting alternatives, forwarding procedures, and passing me PDF manuals.
Regards,
--Anjan
-----Original Message-----
From: Anjan Dave
Sent: Mon 5/23/2005 3:55 PM
To: Anjan Dave; sunmanagers@sunmanagers.org
Cc:
Subject: RE: T3 drive status 'substitute'
Ok, found this in the field service manual - the 'copy-back' operation is supposed to begin automatically after the initial rebuild has finished and the drive is replaced. If it does not begin (like in my case, unfortunately), then:
<t3> vol recon <volume-name> from_standby
Hope that does it...
Thanks,
Anjan
-----Original Message-----
From: Anjan Dave
Sent: Mon 5/23/2005 12:50 PM
To: sunmanagers@sunmanagers.org
Cc:
Subject: T3 drive status 'substitute'
Error: Access is Denied.
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:30:45 EDT