From: Z H (ssefoen@yahoo.com)
Date: Sun May 22 2005 - 00:04:05 EDT
To all helpers:
I have e450 running Solaris 8 accessing EMC CX300. It was working fine before the system maintenance.
After the CX300 and e450 system reboot, the e450 can only see one of the two luns which were configured to the e450 and were working.
The EMC configuration does not change, the EMC box can see the host and also shows both luns are assigned to the e450. But from e450, only one of the two luns appears.
volume manager shows the missing lun are failed. Format does not see the failed lun.
I have looked into /kernel/drv/sd.conf and the missing lun is on c6t0d1s2 and I already have target=6, lun=0-2 defined.
Any tip and help to fix this problem is greatly appreciated.
Thanks.
ssefoen
Yahoo! Small Business - Try our new resources site!
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:30:44 EDT