From: Tech Guy (tek_guy@rediffmail.com)
Date: Thu May 05 2005 - 11:27:24 EDT
I am in the middle of configuring Storedge Array with v880. I have
installed the Qlogic QLA2342 HBA on to v880 in PCI slot 8. I have installed
the latest pathches and Qlogic driver( from Qlogic).
I have configurd the
array with 2 partitions
But in v880 I cannt see the array.
Though the cfgadm
-al says it is configured and connected, I cannot still see the disk
# cfgadm
-al
Ap_Id Type Receptacle Occupant
Condition
c0 scsi-bus connected configured
unknown
c0::dsk/c0t6d0 CD-ROM connected configured
unknown
pcisch0:hpc1_slot0 vgs8514/hp connected configured
ok
pcisch0:hpc1_slot1 unknown empty unconfigured
unknown
pcisch0:hpc1_slot2 unknown empty unconfigured
unknown
pcisch0:hpc1_slot3 unknown empty unconfigured
unknown
pcisch2:hpc2_slot4 unknown empty unconfigured
unknown
pcisch2:hpc2_slot5 unknown empty unconfigured
unknown
pcisch2:hpc2_slot6 unknown empty unconfigured
unknown
pcisch3:hpc0_slot7 unknown empty unconfigured
unknown
pcisch3:hpc0_slot8 mult/hp connected configured
ok
the last one should be the one. I Installed it in PCI slot 8. It says
connected configured and ok. but in format I donot see this Array LUN. I tried
giving devfsadm..but no luck. i ahve installed the recent patches and
drivers..
I appreciate your help. Thanks
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:30:39 EDT