Serial console vs. RSC console

From: Rick von Richter (rickv@memec.com)
Date: Wed Apr 27 2005 - 06:23:34 EDT


We're running across some strange behavior. We are setting aliases and
noticed something strange. If we set the aliases from a serial console
they stick across reboots. If we set them from the RSC console then
they revert. Is there a difference between the serial console and the
RSC console (other than how you get in obviously)? This makes no sense
to me because it's the same OBP.
TIAWS

This message contains confidential information and is intended only for
the individual named. If you are not the named addressee you should not
disseminate, distribute or copy this e-mail. Please notify the sender
immediately by e-mail if you have received this e-mail by mistake and
delete this e-mail from your system. E-mail transmission cannot be
assured to be secure or correct as information could be
intercepted, corrupted, lost, destroyed, arrive late or incomplete, or
contain viruses. The sender therefore does not accept liability for any
errors or omissions in the contents of this message, which arise as a
result of e-mail transmission. If verification is required please
request a hard-copy version.
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers



This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:30:36 EDT