From: Tony Magtalas (ttk67@yahoo.com)
Date: Mon Apr 18 2005 - 15:08:19 EDT
Dear Managers:
I would like to be able to see the console output on
the SP of the V20Z server.
Here is what I did:
On the server, I redirect output/input to ttya:
#eeprom output-device=ttya
#eeprom input-device=ttya
and reboot
Then I login to the service processor via the lan
console using "ssh -l root SP_IPaddress"
Once I get into the SP, I issued the sp command:
localhost #platform console <CR>
The SP comes back with the following:
[Enter `Ec?' for help]
but I do not see any console output on the SP
so what am I missing?
also, 2nd question is: can I login to the SP using
telnet instead of the ssh?
Thanks for any suggestion
Tony
ps: the SP has been updated to the latest firmware
(2.1.0.16/BIOS 1.30.5) and the platform is running
Solaris 10 3/05) if it makes any difference
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:30:33 EDT