From: Rob Wichterman (rwichterman@nuventive.com)
Date: Thu Apr 14 2005 - 11:42:00 EDT
I installed a second Ethernet card in two sunblades so I could play around
with a hardware load balancer and still be able to do maintenance. I
noticed if I have a Ethernet wire plugged into the built in Ethernet jack
only, I can access both IP addresses but if I have it only plugged into the
card that I added I can not access it through either IP's. I was wondering
if the configuration could be wrong and if the second Ethernet card is even
working. How can I test because I do not have the load balancer as of yet?
I plumbed the cards (as per the installation manual),added a hostname.ce0,
and added the entry into the hosts file. Is there something I could be
missing or is this just how it works?
Thanks,
Rob
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:30:32 EDT