From: Al Saenz (asaenz@Found-Tech.com)
Date: Fri Apr 01 2005 - 08:25:03 EST
Well I have another problem.
Machine:
Sun clone AX1105 mother board
Two onboard NICs
Solaris 8
I ran sys-unconfig on a system and now the system will not prompt for
configurations after a reboot.
It just come to the system login and I enter root and bang I am in at the #
prompt.
I tried to type
#sysidtool
sysidtool: not found
The document below says after I run sys-unconfig and reboot I will be prompted
for system config.
http://docs.sun.com/app/docs/doc/806-5529/6jehkcs4b?a=view
"Because you unconfigured the system, you will be prompted for configuration
information by sysidtool programs when the system reboots."
Thank you for your assistance.
All this just to add DHCP client, good thing the system isn't in a operating
environment.
DHCP client should be able to be added w/o a sys-unconfig?
al
PS: I checked the archive and didn't find anything like my problem
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:30:28 EDT