From: Adam Levin (levins@westnet.com)
Date: Thu Mar 31 2005 - 11:08:08 EST
I've got a pair of new V890s (well, supposedly new).
We've never used the RSC -- always either the console (TTYA) or the LOM on
newer machines.
When we first plugged these guys in, we used the serial mgmt port, which
is apparently the RSC. They both came up requiring a password, which we
don't know.
We found infodoc 47745, which says we can plug into ttya and press the
power button twice at poweron to clear NVRAM so that ttya is the console,
but that's not working -- we're still getting the RSC prompy over ttya.
So, we're going to try ripping out the rsc card to see if we get a console
back.
Since we're behind schedule getting these machines up, has anyone else had
any luck clearing the rsc password and getting back to just a regular
console on ttya?
Thanks,
-Adam
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:30:27 EDT