From: Colin Symington (Colin@recurve.co.uk)
Date: Wed Mar 23 2005 - 13:13:54 EST
Any one got any ideas?
6500 is hanging on the loop back test with cursor sticking on the "internal
loopback test-" line without moving to the next line.
Machine conversation is:
{9}ok watch-net-all
/pci@2,2000/pci@2/network@0
Internal loopback test --
I have replaced the Ethernet card and now the watch-net-all openboot command
still hangs at the loopback test and it hangs whether or not the ethernet
cable is inserted. The conversation is as follows:
{0} ok watch-net-all
/pci@2,2000/pci@2/network@0
Internal loopback test --
The hang is fatal and the machine can only be powered cycled to recover.
I've been racking my brains....Anyone got any suggestions?......6500 is
configd to boot from network....IP address is correct etc.....HELP !
Colin Symington
CONFIDENTIALITY AND DISCLAIMER NOTICE
This e-mail is intended only for the addressee named above and the contents
should not be disclosed to any other person nor copies taken. Any views or
opinions presented are solely those of the sender and do not necessarily
represent those of Recurve Technologies Ltd. unless otherwise specifically
stated. As internet communications are not secure we do not accept legal
responsibility for the contents of this message nor responsibility for any
change made to this message after it was sent by the original sender. We
advise you to carry out your own virus check before opening any attachment as
we cannot accept liability for any damage sustained as a result of any
software viruses.
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:30:25 EDT