From: Frank Everitt (feveritt@cisco.com)
Date: Tue Mar 22 2005 - 12:53:51 EST
All...
I'm trying to find a tftpd daemon that will allow the block size to be
a command line option when run from inetd. I ran accross the tftpd-hpa
daemon but it doesn't seem to react the way I'm expecting it to react.
When I run it from inetd and specify the "-B 1468" for the block size,
it has no affect and stops the transfer at 32MB. The syntax I use in
the inetd.conf file is "tftp dgram udp wait root
/usr/local/sbin/in.tftpd in.tftpd -v -v -B 1468 -p -c -U 002 -u tftpd
-s /tftpboot".
Any help on this would be appreciated....
Thanks
Frank
------------------------------------------------------------
| | Frank Everitt
| | Systems Administrator
:|||: :|||: 7025 Kit Creek Rd.
:|||||: :|||||: RTP, NC 27709
..:|||||||:.....:|||||||:.... Ph. (919) 392-8885
FAX. (469) 574 5042
CISCO SYSTEMS Cell: (919) 624-6098
------------------------------------------------------------
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:30:24 EDT