From: nipun sharma (sharma_nipun@hotmail.com)
Date: Sat Mar 19 2005 - 06:04:02 EST
Hi All,
I have configured the Demo Solstice CMIP 9.0 on Sparc mahcine. I tried to
run the example program provided by the Solstice CMIP package with TCP/IP
as transport layer(RFC 1006 package) and it works fine.
With the help of cmiptool provided by Solstice CMIP Package, I am able to
modify the Various Selector values provided by the CMIP Stack i.e PSEL ,
SSEL , TSEL.
But there are some constraints/limitation for modification of TSEL and
SSEL parameters as mentioned in CMIPADMIN guide i.e
a) SSEL Cannot be more than 4 ASCII character
b) TSEL Cannot be configured as empty <null>.
But I have a requirement where I need to configure the TSEL as <null>
and SSEL as 6 ASCII Character ( or 12 digit hexadecimal ).
Moreover Whenever I try to modify the TSEL or SSEL i.e different from the
default value , the program does not work and fails in mp_bind() call.
The error message is :
Default value : TSEL = CMIP , SSEL = Prs
########################
Performing mp_bind()
Communication-Error: Communication Problem.
handle_mp_error
########################
I am not sure whether its possible to modify the TSEL and SSEL parameter
in Solstice CMIP Package. If yes , then how can I solve this issue of
modifying the values i.e 6 ASCII character for SSEL and <null> for TSEL.
Regards
Nipun Sharma
------------------------------------------------------------------------
Screensavers for every mood! Jazz up your screen! Bring your PC to life!
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:30:23 EDT