From: Warren Liang (warren.liang@cox.net)
Date: Fri Mar 18 2005 - 14:09:20 EST
Hello:
I have a JNI FCI-1063 on a Sun E450. HBA connects to a Brocade 3800. An EMC Clariion CX600 is part of the fabric.
Download and installed fca-pci.org on the E450. Packages installed are IS8e8546a EZ Fibre, JNIfcaPCI (v2.6.13), and JNIsnia (v2.0.b). Make changes on two files: on /kernel/drv/fca-pci.conf, changed fca_nport to 1; (2) in /kernel/drv/sd.conf, added entries:
Name=cd parent lpfc target=0 lun=0
Name=cd parent lpfc target=0 lun=1
Name=cd parent lpfc target=1 lun=0
Name=cd parent lpfc target=1 lun=1
On Brocade switch, command nsshow displays this port as:
N 021f00; 2,3;20:00:00:E0:69:C0:4A:55:10:00:00:E0:69:C0:4A:55; na
FC4s: FCIPI created a zone, which consists of the E450 and two Clariion CX600 ports. On Clariion Connectivity Status window, the E450 does not show up. I manually registered it, however, its Fibre Logged In status remains as No. Of course, on E450, it does not show any Clariions disks.
On Brocade, all other hosts/devices show as FCP, only this JNI shows as FCIP.
Thanks in advance and have a good weekend.
Warren
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:30:23 EDT