From: Chuck (steeler_dude99@yahoo.com)
Date: Fri Mar 11 2005 - 08:45:18 EST
Thanks to those below who said that they have taken a
disk from another T3 and used it to replace a T3 disk w/o
problems. I ran a fake "fire drill" to verify and it does in-
deed work. I did not want to find out the hard way in my
time of need. I was also advised to check disk firmware.
In my case, all T3s were of the same firmware and the
disks were all already installed on a T3.
From: "Anjan Dave" <adave@nospamvantage.com>
From: "Bernd Schemmer" <Bernd.Schemmer@nospamgmx.de>
From: "NO UCE" <nouce@nospammighty.co.za>
For my own curiosity, I removed a T3 disk from its sled and
installed it into a SCSI sled as it appears the sun fiber
channel and SCSI sun sleds seem identical. I see the fiber
sleds have the disk WWN on them though. After the disk
was loaded on the 880, I then used
# dd < /dev/rdsk/c1t5d0s2 bs=512 | strings | grep -i t3
and found all kinds of goodies. The T3 name, the clear text
password and lots of other T3 specific data early on and then
it ran for quite a while with no output. I only found the
password as I had the string T3 embedded in it.
That's all folks!!! and Thanks again,
chuck
Yahoo! Small Business - Try our new resources site!
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:30:20 EDT