From: Dan Cave (dan.cave@gmail.com)
Date: Fri Mar 11 2005 - 04:36:29 EST
Hi all
I have been experiencing some problems trying to get a V100 to boot
after having performed what appeared to be a successful jumpstart
installation (not flash archive).
After the jumpstart has finished, i reboot the system and type boot at
the OK prompt. It tells me (OBP that is) the following
"the file just loaded does not appear to be executable"
I can boot the system over the network using the jumpstart server
(boot net -s) and run format and view the partitions on the disk which
appear to be intact and contain filesystem data. I also tried labeling
the disk whilst in format,but this doesn't seem to do much..
I'd very much appreciate someone to point me in the right direction as
to how to get this system to boot correctly as I'm rather pushed for
time to get this system back up.
Summary to follow:
Kindest Regards
dan.
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:30:19 EDT