From: kel1975 (kel1975@gmail.com)
Date: Mon Mar 07 2005 - 19:25:11 EST
Dear all,
I recently accquired an Apple XRaid, and have installed it into a V240
running Solaris 9. It seems to have gone all right thus far, but I am
concerned that I had to edit both the "sd.conf" and "ssd.conf" in
order to detect the device.
The docuemntation supplied with the "LSI Logic Fibre Channel PCI-X"
card and the "LSI Logic Fibre Channel/SCSI Driver Utilities" indicate
that they are expecting to use the "ssd" driver.
However, in trying to enable the X-RAID LUNs, I had to edit sd.conf,
and as such I am worried.
Should Solaris require that you edit both "sd.conf" and "ssd.conf" in
order to enable extended LUN detection on an ssd device ???
The X-RAID's device links are linked to
"/devices/pci@1e,600000/IntraServer,fc@2,1/ssd@0,1", so I think that
it is allconfigured correctly, I am just slightly confused that I
needed to edit sd.conf as well as ssd.conf.
Cheers
kel.
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:30:18 EDT